Nanocrystalline CaWO4 and ZnWO4 Tungstates for Hybrid Organic-Inorganic X-ray Detectors.

Hybrid materials combining an organic matrix and high-Z nanomaterials show potential for applications in radiation detection, allowing unprecedented device architectures and functionality. Herein, novel hybrid organic-inorganic systems were produced using a mixture of tungstate (CaWO4 or ZnWO4) nanoparticles with a P3HT:PCBM blend. The nano-tungstates with a crystallite size of 43 nm for CaWO4 and 30 nm for ZnWO4 were synthesized by the hydrothermal method. Their structure and morphology were characterized by X-ray diffraction and scanning electron microscopy. The hybrid systems were used to fabricate direct conversion X-ray detectors able to operate with zero bias voltage. The detector performance was tested in a wide energy range using monochromatic synchrotron radiation. The addition of nanoparticles with high-Z elements improved the detector response to X-ray radiation compared with that of a pure organic P3HT:PCBM bulk heterojunction cell. The high dynamic range of our detector allows for recording X-ray absorption spectra, including the fine X-ray absorption structure located beyond the absorption edge. The obtained results suggest that nanocrystalline tungstates are promising candidates for application in direct organic-inorganic X-ray detectors.

Triboelectric behaviour of selected MOFs in contact with metals.

MOFs have been effectively used to magnify the triboelectric charge of polymers. However, so far the individual triboelectric properties and charge transfer mechanisms of MOFs haven't been reported. Triboelectric property investigation for selected MOFs show that the main mechanism for MOF triboelectrification in contact with metals is electron transfer.

Matching the Directions of Electric Fields from Triboelectric and Ferroelectric Charges in Nanogenerator Devices for Boosted Performance.

Embedding additional ferroelectric dipoles in contacting polymer layers is known to enhance the performance of triboelectricnanogenerator (TENG) devices. However, the influence of dipoles formed between the triboelectric surface charges on two contacting ferroelectric films has been ignored in all relevant studies. We demonstrate that proper attention to the alignment of the distinct dipoles present between two contacting surfaces and in composite polymer/BaTiO3 ferroelectric films can lead to up to four times higher energy and power density output compared with cases when dipole arrangement is mismatched. For example, TENG device based on PVAc/BaTiO3 shows energy density increase from 32.4 µJ m-2 to 132.9 µJ m-2 when comparing devices with matched and mismatched dipoles. The presented strategy and understanding of resulting stronger electrostatic induction in the contacting layers enable the development of TENG devices with greatly enhanced properties.

All-organic electro-optic waveguide modulator comprising SU-8 and nonlinear optical polymer.

In this paper we describe the principles of operation as well as the fabrication and testing steps of an all-organic waveguide modulator. The modulator comprises an SU-8 core and an electro-optic host-guest polymer cladding. The polymer properties are tuned in order to achieve single mode operation. We used direct-write laser lithography in two steps for the preparation of the devices. The electro-optic coefficient of the polymer is estimated from observing the modulation of the device operated in push-pull mode.